How to Shut Off Your Gas
Turn off your gas meter ONLY if you smell gas or hear the hissing sound of gas escaping.
It's important to know exactly where your gas meter is located (See Diagram A), and how to shut it off in case of emergencies (See Diagram B).
As you face the meter you will see a pipe running from the ground to the meter. Approximately 6 to 8 inches above the ground there is a shut-off valve running parallel with the pipe.
Take a 12" adjustable wrench or larger and turn the valve 1/4 turn in either direction, until the valve is crosswise to the pipe. (See Diagram B)
Keep a 12" adjustable wrench or larger with your emergency supplies, or next to your valve. Read additional emergency information in case of an earthquake.
For safety, a shut-off valve should be installed at every gas appliance. If a leak occurs at a specific appliance, the valve will permit you to turn off the gas at the appliance rather than shutting off all gas service at the meter. Some valves require a wrench to turn them. See Diagram A.
Do Not Use the Gas Meter for Electric Bonding
Electric bonding to or use of SDG&E service piping, gas risers or meter facilities for electric grounding is not permitted. Use caution when touching gas meters. Faulty household appliances or faulty household electrical wiring could inadvertently introduce electricity to gas facilities.
CAUTION: If you turn off your gas at the meter, leave it off. Don’t turn it back on yourself. Have SDG&E turn it back on and relight the pilots.